24. ANTI LOCK BRAKE SYSTEM (ABS)
1) power supply, wheel speed sensor & oil feeding connector circuit
a. CONNECTOR INFORMATION
connector no
(pin no, color) | connecting wiring harness | connector position |
| C107 (10 Pin, Black) | Front – Body | Behind Left A Pillar |
| C201 (18 Pin, Blue) | Body – IP | Under I/P Fuse Block |
| C211 (22 Pin, Yellow) | IP – Body | Under Left A Pillar |
| G104 | Front | Behind Right Head Lamp |
b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION
c. POSITION OF CONNECTORS AND GROUNDS
d. SPLICE PACK
s101 (mr-140/hv-240)
s101 (sirius d4)
2) abs warning lamp module, parking brake, brake fluid switch & warning (abs, brake) lamp circuit
2-1) notch back
a. CONNECTOR INFORMATION
connector no
(pin no, color) | connecting wiring harness | connector position |
| C102 (20 Pin, White) | Engine – Front | Engine Room Fuse Block |
| C106 (8 Pin, Black) | Front – Body | Behind Left A Pillar |
| C107 (10 Pin, Black) | Front – Body | Behind Left A Pillar |
| C201 (18 Pin, Blue) | Body – IP | Under I/P Fuse Block |
| C204 (4 Pin, White) | Front – IP | Under I/P Fuse Block |
| C213 (15 Pin, White) | IP - Body | Under Left A Pillar |
| C401 (8 Pin, White) | Body – Rear (N/B) | Behind Left Rear Wheel House |
| G102 | Front | Behind Left Head Lamp |
| G104 | Front | Behind Right Head Lamp |
b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION
c. POSITION OF CONNECTORS AND GROUNDS
2-2) hatch back
a. CONNECTOR INFORMATION
connector no
(pin no, color) | connecting wiring harness | connector position |
| C102 (20 Pin, White) | Engine – Front | Engine Room Fuse Block |
| C106 (8 Pin, Black) | Front – Body | Behind Left A Pillar |
| C107 (10 Pin, Black) | Front – Body | Behind Left A Pillar |
| C201 (18 Pin, Blue) | Body – IP | Under I/P Fuse Block |
| C204 (4 Pin, White) | Front – IP | Under I/P Fuse Block |
| C213 (15 Pin, White) | IP – Body | Under Left A Pillar |
| C401 (8 Pin, White) | Tail Gate – Body (H/B) | Under Left C Pillar |
| G102 | Front | Behind Left head Lamp |
| G104 | Front | Behind Right Haed Lamp |
b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION
c. POSITION OF CONNECTORS AND GROUNDS
sm
