5. TCM (TRANSMISSION CONTROL MODULE)
1) power supply, ground, pnp switch & ecm circuit
1-1) notch back
a. CONNECTOR INFORMATION
connector no
(pin no, color) | connecting wiring harness | connector position |
| C101 (4 Pin, Black) | Engine – TCM | Behind Coolant Reservoir |
| C102 (20 Pin, White) | Engine – Front | Engine Room Fuse Block |
| C202 (11 Pin, White) | TCM – IP | Behind I/P Fuse Block |
| C204 (4 Pin, White) | Front – IP | Under I/P Fuse Block |
| C211 (22 Pin, Yellow) | Front – Body | Under Left A Pillar |
| C401 (8 Pin, White) | Body – Rear (N/B) | Behind Left Rear Wheel House |
| G103 | Engine | Next to #4 Injector |
| G402 | Rear (N/B) | Center Trunk Room Panel |
b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION
c. POSITION OF CONNECTORS AND GROUNDS
1-2) hatch back
a. CONNECTOR INFORMATION
connector no
(pin no, color) | connecting wiring harness | connector position |
| C101 (4 Pin, Black) | Engine – TCM | Behind Coolant Reservoir |
| C102 (20 Pin, White) | Engine – Front | Engine Room Fuse Block |
| C202 (11 Pin, White) | TCM – IP | Behind I/P Fuse Block |
| C204 (4 Pin, White) | Front – IP | Under I/P Fuse Block |
| C211 (22 Pin, Yellow) | Front – Body | Under Left A Pillar |
| G103 | Engine | Next to #4 Injector |
| G401 | Body (H/B) | Left Tail Gate Panel |
| G402 | Body (H/B) | Right Tail Gate Panel |
b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION
c. POSITION OF CONNECTORS AND GROUNDS
2) solenoid, stop lamp switch, oil temperature sensor & input shift speed sensor (iss) circuit
a. CONNECTOR INFORMATION
connector no
(pin no, color) | connecting wiring harness | connector position |
| C101 (4 Pin, Black) | Engine – TCM | Behind Coolant Reservoir |
| C202 (11 Pin, White) | TCM – IP | Behind I/P Fuse Block |
| C204 (4 Pin, White) | Front – IP | Under I/P Fuse Block |
| G103 | Engine | Next to #4 Injector |
b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION
c. POSITION OF CONNECTORS AND GROUNDS
3) vss & hold switch circuit
a. CONNECTOR INFORMATION
connector no
(pin no, color) | connecting wiring harness | connector position |
| C101 (4 Pin, Black) | Engine – TCM | Behind Coolant Reservoir |
| C202 (11 Pin, White) | TCM – IP | Behind I/P Fuse Block |
| G103 | Engine | Next to #4 Injector |
| G202 | IP | Behind Right Ashtray |
b. CONNECTOR IDENTIFICATION SYMBOL & PIN NUMBER POSITION
c. POSITION OF CONNECTORS AND GROUNDS
d. SPLICE PACK
s202
sm
